3D wire panels machine from China manufacturer - Anping Xinjia Metal Products Co., Ltd.

Payment Terms:	T/T
Place of Origin:	Hebei, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Means of Transport: Ocean

Packing: Wooden

Application: Others

Brand Name: XinJia Metal

Production Capacity: 10 Sets Per Month

Delivery Date: 10 Days After Receiving The...

Type: Woven

3D wire panels machine

The automatic production line of 3Dimensional,adopt PLC control system with touch screen,by pneumatic and stepping motor power,via auto oblique joint and cut off,the strict fixing of flat mesh and foam panel,the combined welding of oblique cutting wire and flat mesh,to finish the produce of iron wire mesh frame polystyrene sandwich panel. It has following character:automation production,high productivity,loss welding rate,large strength of welding point,welding uniformity,good surface,and the production cost is very low.

The main parameter:

Rated electrical power			75KVA
Input voltage			AV380V 50HZ
Air source allocation			3 Cubic meter/MIN 0.6MPa
Applicable range	Core panel thickness		30mm-100mm
	Truss wire configuration		Single or double sided mesh ,different densities of truss wires
production standard	Standard Sandwich panel	Llength	3000mm
		Width	1220mm
	Nonstandard sandwich panel		The length according to your requirement ≤4500mm
material characteristic	Welded wire material		1.5mm-2.5mm cold-drawing low-carbon steel wire
	Core panel material		EPS board & XPS board
	Gridding space of mesh		50mm*52mm
product efficiency			seeing the attached table
Lack welding rate			≤5%
Welding strength			(single point)≥330N
Overall dimension		Length	13500mm
		Width	1800mm
		Height	1700mm
Weight			4000kg

The finished products

Output speed :

Based on a 300 working days per year, each with 8 hours and assumed efficiency factor of 60 % (depending on local conditions), this results in a max. net output of pprox.300.000 m2 per year and per one working shift on a thuss step of 200 mm and in a max. net output of approx. 220.000 m2 per year and per one working shift on a truss step of 100 mm. Hard drawn wire for cover mesh and for splice mesh:3 mm diameter, minimum yield strengsth of 500 to 550 N/mm2, maximum carbon contend 0.15 %, clean wiresurface, no rust, rease, oil, paint or drawing compounds to insure smooth flow of the welding current. Galvanized wire for spacer (truss) wires:3.8 mm diameter, minimum yield strenth of 700 N/mm2, maximum carbon content 0.15 %, clean wire surface and uniform zinc coating.